In short the two bucket method means that you have two buckets - One bucket filled with warm water with a cap full of OUR PURE SHAMPOO. The second bucket is filled with clean water.
1. This method stops the transfer of dirt from the wash mitt to the clean water.
2. Minimising dirt in the clean bucket reduces scratch’s and swirl marks on the paintwork.
3. A grit guard should always be used, as the funnels filter and trap the dirt beneath the guard ensuring that your wash mitt won’t pick up these bits of dirt and scratch your paintwork.
4. You should never contact wash without pre-washing the vehicle first, the prewash stage eliminates majority of the dirt - therefore use Rapid10 and Dynamic first before using Pure Shampoo.
5. DO NOT USE A SPONGE - always use a microfibre wash mitt, these mitts are designed to capture dirt within the fibres which will not allow the dirt to swirl dirt around the paintwork.
If anyone has any questions, don’t be afraid to send us an email.